Subaru LEGACY 2006 Manual page 3379

asieps_tobira.book 66 ページ ２００９年１０月２６日 月曜日 午前９時１６分
AUTOMATIC TRANSMISSION
D: ASSEMBLY
1) Press-fit the new oil seal using ST and the press.
ST 498057300 INSTALLER
2) Press-fit the dust cover.
3) Insert the transfer clutch assembly, spring re-
tainer, return spring and clutch spring retainer.
(D)
(C)
(B)
(A)
(A) Clutch spring retainer
(B) Return spring
(C) Spring retainer
(D) Transfer clutch piston ASSY
4) Using the ST and compressor, install the snap
ring.
ST 18762AA000 COMPRESSOR SPECIAL
TOOL
5) Install the transfer clutch. <Ref. to 5AT-67, IN-
STALLATION, Transfer Clutch.>
6) Install the multi-plate hub assembly.
E: INSPECTION
• Use compressed air to make sure the extension
case routes are not clogged or leaking.
• Inspect the extension end play, and adjust it to
within the standard value.
<Ref. to 5AT-67, ADJUSTMENT, Transfer Clutch.>
Extension Case
AT-03230
ST
AT-03228
5AT-66