Subaru LEGACY 2006 Manual page 3610

asieps_tobira.book 117 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
12 CHECK LATERAL G SENSOR.
Measure the voltage between lateral G sensor
connector terminals.
Connector & terminal
(B359) No. 3 (+) — No. 2 (–):
13 CHECK TCM.
1) Turn the ignition switch to OFF.
2) Connect all connectors.
3) Perform the Clear Memory Mode.
4) Perform the Inspection Mode.
5) Read the DTC.
14 CHECK OTHER DTC DETECTION.
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
Check
Is the voltage 0.7 — 1.7 V
when lateral G sensor is
inclined 90° to left?
Is the same DTC displayed?
Is any other DTC displayed?
5AT(diag)-117
Yes No
Go to step 13. Replace the lat-
eral G sensor.
<Ref. to 5AT-57,
Lateral G Sensor.>
Go to step 14.
Replace the TCM.
<Ref. to 5AT-56,
Transmission Con-
trol Module
(TCM).>
Perform the diag- Temporary poor
nosis according to contact occurs.
DTC.