Engine Oil - Subaru LEGACY 2006 Manual

asieps_tobira.book 3 ページ ２００９年１０月２６日 月曜日 午前９時１６分
B: PRE-DELIVERY INSPECTION (PDI) PROCEDURE
STATIC CHECKS JUST AFTER VEHICLE RECEIPT
PROCEDURE
1. Appearance check
2. Tire check
3. Fuse installation
4. Air conditioner harness connection
5. Lock/unlock and open/close operation checks
of doors
6. Operation check of child safety lock system
7. Open/close operation checks of trunk lid
8. Operation check of trunk lid release lever
9. Check the rear gate for lock/unlock and open/
close operations
10. Operation check of fuel lid opener lock release
lever
11. Accessory check
12. Operation check of front hood lock release
system
13. Battery
14. Brake fluid

15. Engine oil

16. Transmission gear oil
17. AT front differential oil
18. Engine coolant
19. Clutch fluid
20. Window washer fluid
21. Front hood latch check
22. Keyless entry system
23. Alarm system
Pre-delivery Inspection
1. If the vehicle is covered with protective coating, visually check the vehicle
body for damage and dents. If the protective coating has been removed,
visually check the body painted area for damage or stains in detail.
2. Visually check the glass and light lenses for any damage, cracks or
excessive gaps between body sheet metal.
3. Visually check the plated parts for any damage.
1. Check the tires for damage, defective, and dents on wheels.
2. Check the tire air pressure.
If the vehicle is about to be delivered to customer, attach a back-up fuse.
If the vehicle is about to be delivered to the customer, connect the air condi-
tioner harness.
1. Using the key, check the trunk lid can be locked or unlocked normally.
2. Open and close all doors to check that there are no defective.
3. Operate the power door lock switch to check that the door (rear gate) is
locked and unlocked normally.
Check the child safety lock system operates normally.
1. Operate the trunk lock release lever to check that the trunk lid opens nor-
mally.
2. Check that main and sub keys can lock/unlock the release lever, and that
valet key can not lock/unlock the release lever.
3. Open and close the trunk lid to see that there are no abnormal conditions.
Operate the trunk lid release lever to check that the trunk lock is unlocked
normally.
1. Check if the rear gate can be unlocked normally through the emergency
hole.
2. Open and close the rear gate to see that there are no abnormal condi-
tions.
Operate the fuel lid opener to check that the fuel lid is unlocked normally.
Check that the following accessories are provided.
• Owner's manual
• Warranty booklet
• Maintenance note
• Spare key
• Jack
• Tool set
• Spare tire
Operate the front hood lock release lever to check that the front hood is
unlocked normally.
Check the battery terminals for any abnormal conditions such as rust and
trace of battery fluid leaks.
Check that the fluid level is normal.
Check that the oil level is normal.
Check that the transmission gear oil level is normal.
Check that the AT front differential oil level is normal.
Check that the engine coolant level is normal.
Check that the clutch fluid level is normal.
Check that the window washer fluid level is normal.
Check that the hood is closed and latched securely.
Check that the keyless entry system operates normally.
Check that the alarm system operates normally.
PI-3
PRE-DELIVERY INSPECTION
Check point