Subaru LEGACY 2006 Manual page 3323

asieps_tobira.book 25 ページ ２００９年１０月２６日 月曜日 午前９時１６分
ILLUSTRATION
ST-499755602
ST18680AA010
ST18766AA000
ST18767AA000
2. GENERAL TOOL
TOOL NAME
Depth gauge
Thickness gauge
Micrometer
Spring balance
Circuit tester
®
TORX T70
Snap ring pliers
General Description
TOOL NUMBER DESCRIPTION
499755602 PRESS
18680AA010 HOLDER GEAR
18766AA000 SUPPORT PULLER
18767AA000 REMOVER
Used for measuring the transmission end play.
Used for measuring clearance of the clutch, brake and oil
pump.
Used for measuring thickness of the drive pinion.
Used for measuring the starting torque of the drive pinion.
Used for measuring resistance and voltage.
Used for removing and installing differential gear oil drain plug.
Used for removing and installing each snap ring.
5AT-25
AUTOMATIC TRANSMISSION
REMARKS
Used for installing the parking gear.
Used for removing reduction driven gear assem-
bly. (2-piece set)
Used for removing reduction driven gear assem-
bly.
• Used to pull out the parking gear.
• Used to pull out the bearing from the VTD
assembly.
REMARKS