Subaru LEGACY 2006 Manual page 3868

asieps_tobira.book 49 ページ ２００９年１０月２６日 月曜日 午前９時１６分
12) Drive out the pinion shaft lock pin from the hy-
poid driven gear side.
NOTE:
The lock pin is staked at the pin hole end on the dif-
ferential case. Do not drive it out forcibly before re-
moving the stake.
ST 899904100 STRAIGHT PIN REMOVER
13) Draw out the pinion mate shaft and remove pin-
ion mate gears, side gears and thrust washers.
NOTE:
The gears should be marked or kept separated
right and left, and front and rear as well as thrust
washers.
(A) Side gear
(B) Pinion mate gear
(C) Thrust washer
(D) Differential case
(E) Pinion mate shaft
Rear Differential (VA-type)
14) Remove the self-locking nut while holding the
companion flange with ST.
ST 498427200
ST
15) Extract the companion flange with a puller.
DI-00237
16) Press the end of drive pinion shaft and extract it
together with rear bearing cone, pinion height ad-
justing washer and washer.
NOTE:
Hold the drive pinion so as not to drop it.
DI-00238
ST 398467700
DI-49
DIFFERENTIALS
FLANGE WRENCH
ST
(A)
(B)
(A) Companion flange
(B) Puller
DRIFT
ST
DI-00141
DI-00142
DI-00073