Subaru LEGACY 2006 Manual page 3715

asieps_tobira.book 31 ページ ２００９年１０月２６日 月曜日 午前９時１６分
AT Shift Lock Solenoid and "P" Range Switch
11) Disconnect the terminal of the "P" range switch
from connector, using a flat-tip screwdriver with a
thin tip.
(A) "P" range switch
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Refer to "COMPONENT" for each tightening
torque. <Ref. to CS-2, AT SELECT LEVER, COM-
PONENT, General Description.>
• Connect the "P" range switch terminal to connec-
tor.
(A) "P" range switch
(A)
4 3 2 1
10 9 8 7 6 5
CS-00529
(A)
4 3 2 1
10 9 8 7 6 5
CS-00529
CS-31
CONTROL SYSTEMS