Subaru LEGACY 2006 Manual page 3488

asieps_tobira.book 3 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Step
6 PERFORM DIAGNOSIS.
1) Inspect using the "Diagnostic Procedure
with Diagnostic Trouble Code (DTC)".<Ref. to
4AT(diag)-29, Diagnostic Procedure with Diag-
nostic Trouble Code (DTC).>
NOTE:
For DTC table, refer to "List of Diagnostic Trou-
ble Code (DTC)". <Ref. to 4AT(diag)-27, List of
Diagnostic Trouble Code (DTC).>
2) Repair the trouble cause.
3) Perform the Clear Memory Mode.
4) Perform the Inspection Mode.<Ref. to
4AT(diag)-18, Inspection Mode.>
5) Display the DTC.
Basic Diagnostic Procedure
Check
Is DTC displayed?
4AT(diag)-3
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
Yes
Inspect using the
"Diagnostic Proce-
dure with Diagnos-
tic Trouble Code
(DTC)".<Ref. to
4AT(diag)-29,
Diagnostic Proce-
dure with Diagnos-
tic Trouble Code
(DTC).>
No
Finish the diagno-
sis.