Subaru LEGACY 2006 Manual page 3259

asieps_tobira.book 110 ページ ２００９年１０月２６日 月曜日 午前９時１６分
AUTOMATIC TRANSMISSION
C: DISASSEMBLY
1. HIGH CLUTCH AND REVERSE CLUTCH
1) Remove the snap ring, and then take out the re-
taining plate, drive plate and driven plate.
(A)
(A) Snap ring
2) Remove the snap ring, and then take out the re-
taining plate, drive plate and driven plate.
(A)
(A) Snap ring
3) Using the ST1 and ST2, remove the snap ring.
ST1 398673600 COMPRESSOR
ST2 498627100 SEAT
(A)
(A) Snap ring
AT Main Case
4) Take out the clutch cover, spring retainer, high
clutch piston and reverse clutch piston.
(A)
(A) Reverse clutch piston
(B) Cover
AT-00236
(C) Return spring
5) Remove the seal ring and lip seal from the high
clutch piston and reverse clutch piston.
AT-00237
(A) High clutch piston
(B) Reverse clutch piston
2. PLANETARY GEAR AND LOW CLUTCH
1) Remove the snap ring from low clutch drum.
ST1
(A)
ST2
(B)
AT-00238
(A) Snap ring
(B) Low clutch drum
4AT-110
(B)
(C)
AT-00239
(A)
(B)
AT-00240
AT-00259