Subaru LEGACY 2006 Manual page 3344

asieps_tobira.book 50 ページ ２００９年１０月２６日 月曜日 午前９時１６分
AUTOMATIC TRANSMISSION
19) Disconnect the connector from turbine speed
sensor 1.
20) Remove the rear vehicle speed sensor.
21) Remove the oil pan.
22) Disconnect the control valve connector and
front vehicle speed sensor connector.
(A)
(A) Control valve connector
(B) Front vehicle speed sensor connector
23) Remove the control valve body.
Rear Vehicle Speed Sensor
24) Remove the bolt securing harness of transmis-
sion main case.
AT-01387
25) Remove the harness assembly.
B: INSTALLATION
1) Pass the harness assembly through the hole in
transmission case.
AT-03225
2) Install the securing bolt of transmission main
case.
Tightening torque:
(B)
AT-01956
AT-01957
5AT-50
7 N·m (0.7 kgf-m, 5.2 ft-lb)
AT-02035
AT-00048
AT-02035