Subaru LEGACY 2006 Manual page 3622

asieps_tobira.book 3 ページ ２００９年１０月２６日 月曜日 午前９時１６分
Step
6 PERFORM DIAGNOSIS.
1) Inspect using the "Diagnostic Procedure
with Diagnostic Trouble Code (DTC)". <Ref. to
5AT(diag)-32, Diagnostic Procedure with Diag-
nostic Trouble Code (DTC).>
NOTE:
For DTC table, refer to "List of Diagnostic Trou-
ble Code (DTC)." <Ref. to 5AT(diag)-29, List of
Diagnostic Trouble Code (DTC).>
2) Repair the trouble cause.
3) Perform the Clear Memory Mode.
4) Perform the Inspection Mode. <Ref. to
5AT(diag)-20, Inspection Mode.>
5) Display DTC.
Basic Diagnostic Procedure
Check
Is DTC displayed?
5AT(diag)-3
AUTOMATIC TRANSMISSION (DIAGNOSTICS)
Yes
Inspect using the
"Diagnostic Proce-
dure with Diagnos-
tic Trouble Code
(DTC)". <Ref. to
5AT(diag)-32,
Diagnostic Proce-
dure with Diagnos-
tic Trouble Code
(DTC).>
No
Inspect using
"General Diagnos-
tic Table". <Ref. to
5AT(diag)-134,
General Diagnos-
tic Table.>