Subaru LEGACY 2006 Manual page 3790

asieps_tobira.book 44 ページ ２００９年１０月２６日 月曜日 午前９時１６分
MANUAL TRANSMISSION AND DIFFERENTIAL
12.Center Differential
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 5MT-24, REMOVAL,
Manual Transmission Assembly.>
2) Remove the transfer case together with the ex-
tension case assembly. <Ref. to 5MT-36, REMOV-
AL, Transfer Case
Assembly.>
3) Remove the extension case assembly. <Ref. to
5MT-36, REMOVAL, Transfer Case and Extension
Case Assembly.>
4) Remove the transfer driven gear. <Ref. to 5MT-
42, REMOVAL, Transfer Driven Gear.>
5) Remove the center differential.
B: INSTALLATION
1) Install the center differential into transfer case.
2) Install the transfer driven gear. <Ref. to 5MT-42,
INSTALLATION, Transfer Driven Gear.>
3) Install the extension case assembly. <Ref. to
5MT-36, INSTALLATION, Transfer Case and Ex-
tension Case Assembly.>
4) Install the transfer case together with the exten-
sion case assembly. <Ref. to 5MT-36, INSTALLA-
TION, Transfer Case and Extension Case
Assembly.>
5) Install the back-up light switch and the neutral
position switch. <Ref. to 5MT-33, INSTALLATION,
Switches and Harness.>
6) Install the manual transmission assembly to the
vehicle. <Ref. to 5MT-26, INSTALLATION, Manual
Transmission Assembly.>
C: DISASSEMBLY
NOTE:
Center differential is a non-disassembled part
which should not be disassembled.
Remove the ball bearing using ST.
NOTE:
Do not reuse the ball bearing.
ST 498077300 CENTER DIFFERENTIAL
BEARING REMOVER
ST
Center Differential
and Extension Case
MT-00147
5MT-44
D: ASSEMBLY
Install the ball bearing into the center differential
assembly.
NOTE:
Do not apply pressure in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton).
(A) Ball bearing
E: INSPECTION
1) Bearing
Replace the bearings in the following cases.
• In case of broken or rusty bearings
• In case of worn or damaged bearings
• When the bearings fail to turn smoothly or emit
noise in rotation after gear oil lubrication.
• When bearing has other defects.
2) Center differential
Replace the center differential case assembly if
worn or damaged.
(A)
MT-00148