Rear Differential Gear Oil - Subaru LEGACY 2006 Manual

asieps_tobira.book 3 ページ ２００９年１０月２６日 月曜日 午前９時１６分
2. IDENTIFICATION
Identification label positions are shown in the fol-
lowing figures. For details concerning identification,
refer to the "ID" section.
• T-type
(1) Identification
• VA1-type
(1)
(1) Identification
4. SERVICE DATA
Measure with spring measure-
Drive pinion
ment. (Measured from the
bearing pre-
companion flange bolt)
load (For new
bearing)
Measure with torque wrench
Side gear backlash
Hypoid driven gear to drive pinion backlash
Hypoid driven gear runout on its back surface
General Description
• VA2-type
(1)

3. REAR DIFFERENTIAL GEAR OIL

ID-00056
Recommended gear oil:
NOTE:
Each oil manufacturer has its base oil and addi-
tives. Thus, do not mix two or more brands.
DI-00396
N (kgf, lb)
N·m (kgf-m, ft-lb)
mm (in)
mm (in)
mm (in) T-type only
DI-3
(1)
(1) Identification
GL-5 (75W-90)
(1)
(2)
(3)
GL-5
(4)
( C) -30 -26 -15 -5 0
( F) -22 -15 5 23 32
85W
80W
75W -90
(1) Item
(2) Rear differential gear oil
(3) API classification
(4) SAE viscosity No. and applicable temperature
T-type 17.7 — 38.8 (1.8 — 4.0, 4.0 — 8.7)
VA-type 12.7 — 32.2 (1.3 — 3.3, 2.9 — 7.2)
T-type 0.67 — 1.47 (0.068 — 0.15, 0.49 — 1.08)
VA-type 0.48 — 1.22 (0.049 — 0.124, 0.35 — 0.9)
T-type 0.10 — 0.20 (0.0039 — 0.0079)
VA1-type only 0.05 — 0.15 (0.0020 — 0.0059)
T-type 0.10 — 0.20 (0.0039 — 0.0079)
VA-type 0.10 — 0.15 (0.0039 — 0.0059)
0.05 (0.0020)
DIFFERENTIALS
DI-00397
15 25 30
59 77 86
90
MT-00001