Subaru LEGACY 2006 Manual page 4086

asieps_tobira.book 9 ページ ２００９年１０月２６日 月曜日 午前９時１６分
4. Rear Arm
A: REMOVAL
1) Lift up the vehicle, and then remove the rear
wheels.
2) Remove the sub frame support arm.
<Ref. to RS-20, REMOVAL, Sub Frame Support
Arm.>
3) Remove the bearing unit.
<Ref. to DS-19, REMOVAL, Rear Hub Unit Bear-
ing.>
4) Hang the back plate from sub frame.
5) Remove the bolt which secures the parking
brake cable clamp to the rear arm bracket.
6) Remove the bolt which holds the brake hose
bracket and ABS wheel speed sensor bracket to
the rear arm.
Rear Arm
7) Remove the bolts which secure the brake hose
bracket to the rear arm. Remove the bolts which
secure the ABS wheel speed sensor to the rear
arm.
8) Remove the stabilizer link from the rear arm.
RS-00043
9) Remove the shock absorber from the rear arm.
RS-00040
10) Support the rear arm horizontally using a trans-
mission jack.
RS-00041
RS-9
REAR SUSPENSION
RS-00124
RS-00044
RS-00045
RS-00046