Subaru LEGACY 2006 Manual page 3778

asieps_tobira.book 59 ページ ２００９年１０月２６日 月曜日 午前９時１６分
3) Remove the roller bearing and washer using ST
and a press.
NOTE:
Do not reuse the roller bearing.
ST 498077000 REMOVER
4) Flatten the lock nut tab. Remove the lock nut us-
ing ST1 and ST2.
ST1 499987300 SOCKET WRENCH (50)
ST2 899884100 HOLDER
ST2
ST1
5) Remove the 5th driven gear using ST.
ST 499857000 5TH DRIVEN GEAR REMOV-
ER
6) Remove the woodruff key.
Drive Pinion Shaft Assembly
7) Remove the roller bearing and 3rd-4th driven
gear using ST1 and ST2.
ST1 499757002
ST2 899714110
ST
8) Remove the key.
MT-00246
9) Remove the 2nd driven gear, inner baulk ring,
synchro cone and outer baulk ring.
MT-00247
10) Remove the 1st driven gear, 2nd gear bushing,
gear and hub using ST1 and ST2. (Non-turbo mod-
el)
S T
MT-00248
5MT-59
MANUAL TRANSMISSION AND DIFFERENTIAL
INSTALLER
REMOVER
(D)
(C) (B)
(A) 2nd driven gear
(B) Inner baulk ring
(C) Synchro cone
(D) Outer baulk ring
(A) (B) (C)
(A) 1st driven gear
(B) Inner baulk ring
(C) Hub
(D) 2nd gear bushing
ST1
ST2
MT-00249
(A)
MT-01223
(D)
MT-01224