Subaru LEGACY 2006 Manual page 3389

asieps_tobira.book 37 ページ ２００９年１０月２６日 月曜日 午前９時１６分
35) Remove the two clutch housing cover securing
bolts.
36) Remove the front stabilizer bracket. <Ref. to
FS-14, REMOVAL, Front Stabilizer.>
37) Remove the bolts which secure front ball joint
to the housing. <Ref. to FS-15, REMOVAL, Front
Ball Joint.>
38) Pull out the drive shaft from transmission.
39) Set the transmission jack under the transmis-
sion.
40) Remove the rear crossmember.
Automatic Transmission Assembly
41) Remove the transmission mounting bolt (lower
side).
AT-01373
42) Remove the transmission.
NOTE:
• Turn the engine support assembly from the vehi-
cle under body to the left (to shorten the engine
support length), and lower the rear of the engine for
easy disassembly.
• Be careful not to allow breather pipe and etc. to
touch the vehicle body when detaching the auto-
matic transmission assembly by pulling it back-
ward.
AT-01374
B: INSTALLATION
1) Attach the ST to converter case.
ST 498277200
2) Install the transmission onto the engine.
AT-01376
AT-01377
5AT-37
AUTOMATIC TRANSMISSION
STOPPER SET
(1) Lift-up the transmission gradually using
transmission jack.
(2) Engage at the spline.
AT-03238
ST
AT-00103