Subaru LEGACY 2006 Manual page 3732

asieps_tobira.book 67 ページ ２００９年１０月２６日 月曜日 午前９時１６分
C: DISASSEMBLY
1. DIFFERENTIAL CASE ASSEMBLY
1) Loosen the twelve bolts and remove hypoid driv-
en gear.
(A)
(A) Hypoid driven gear
2) Drive out the straight pin from differential assem-
bly toward hypoid driven gear side.
ST 899904100 REMOVER
Front Differential Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL
3) Pull out the pinion shaft, and remove the differ-
ential bevel pinion, bevel gear and washer.
4) Using the ST, remove the roller bearing.
ST 899524100
MT-00275
2. SIDE RETAINER
1) Remove the O-ring.
ST
MT-00276
5MT-67
(D)
(A)
(C)
(B)
(A) Pinion shaft
(B) Bevel pinion
(C) Bevel gear
(D) Washer
PULLER SET
ST
(B)
(C)
(D)
MT-00277
MT-00278
MT-00279