Subaru LEGACY 2006 Manual page 3387

asieps_tobira.book 35 ページ ２００９年１０月２６日 月曜日 午前９時１６分
13) Remove the water by-pass pipe. (Turbo model)
14) Separate the torque converter from drive plate.
(1) Remove the service hole plug.
(2) Remove the bolts which hold torque con-
verter to drive plate.
(3) Remove the four bolts by rotating the clamp
pulley a little at a time.
(4) Make sure the torque converter moves free-
ly by rotating with finger through the starter in-
stallation hole.
CAUTION:
Be careful not to drop bolts into converter
housing.
15) Attach the ST to the converter case.
ST 498277200 STOPPER SET
Automatic Transmission Assembly
16) Remove the pitching stopper.
AT-01366
17) Remove the pitching stopper bracket.
18) Set the ST.
ST 41099AC000 ENGINE SUPPORT ASSY
AT-01367
19) Remove the air intake duct. (Turbo model)
<Ref. to IN(H4DOTC)-9, REMOVAL, Air Intake
Duct.>
20) Remove the air cleaner case. (Turbo model)
<Ref. to IN(H4DOTC)-8, REMOVAL, Air Cleaner
Case.>
21) Remove the transmission mounting bolt (upper
side).
ST
AT-00103
5AT-35
AUTOMATIC TRANSMISSION
AT-01368
AT-01369
ST
AT-02984
AT-03237