Subaru LEGACY 2006 Manual page 3262

asieps_tobira.book 113 ページ ２００９年１０月２６日 月曜日 午前９時１６分
5. ONE-WAY CLUTCH OUTER RACE
1) Remove the one-way clutch after taking out the
snap ring.
(A)
(B)
(A) Snap ring
(B) Plate
(C) One-way clutch
2) Remove the needle bearing after taking out the
snap ring.
(A)
(A) Needle bearing
(B) Snap ring
AT Main Case
D: ASSEMBLY
1. HIGH CLUTCH AND REVERSE CLUTCH
1) Install the seal ring and lip seal to the high clutch
piston and reverse clutch piston.
(C)
2) Install the high clutch piston to the reverse clutch
piston.
AT-00267
3) Install the reverse clutch piston to the high clutch
(B)
drum. Align the groove on reverse clutch piston
with the groove on high clutch drum during installa-
tion.
AT-00268
4) Install the spring retainer to the high clutch pis-
ton.
4AT-113
AUTOMATIC TRANSMISSION
(A)
(B)
(A) High clutch piston
(B) Reverse clutch piston
(A)
(A) Reverse clutch piston
(B) High clutch drum
(A)
(A) Spring retainer
(B) High clutch drum
AT-00240
(B)
AT-00241
(B)
AT-00242