asieps_tobira.book 9 ページ 2009年10月26日 月曜日 午前9時16分
Rotate the left side counterclockwise.
Rotate the left side clockwise.
4) Tighten two new self-locking nuts.
Tightening torque:
152 N·m (15.5 kgf-m, 112.1 ft-lb)
3. CASTER
INSPECTION
1) Place the front wheel on the turning radius
gauge. Make sure the ground contact surfaces of
the front and rear wheels are at the same height.
2) Set the adapter into the center of wheel, and
then set the wheel alignment gauge.
(1)
(2)
(1) Alignment gauge
(2) Turning radius gauge
(3) Adapter
Wheel Alignment
To increase camber.
FS-00009
To decrease camber.
FS-00010
3) Measure the caster angle in accordance with the
operation manual for wheel alignment gauge.
Sedan
Wagon
(3)
FS-00213
FS-9
FRONT SUSPENSION
Rotate the right side clockwise.
Rotate the right side counterclockwise.
Model
Caster (Reference)
2.5i, 2.5GT
5°55'
OUTBACK
4°55'
2.5i, 2.5i.LTD,
5°40'
2.5GT
OUTBACK
4°55'
FS-00010
FS-00009