Subaru LEGACY 2006 Manual page 4017

asieps_tobira.book 47 ページ ２００９年１０月２６日 月曜日 午前９時１６分
B: INSTALLATION
1. H4 MODEL
1) Install the oil pump to bracket.
(1) Place the oil pump bracket in a vise. Tighten
the bushing using a 12.7 mm (1/2") type, 14 and
21 mm box wrench until it is in contact with the
oil pump mounting surface.
CAUTION:
When securing the oil pump bracket in a vice,
hold the oil pump bracket with the least possi-
ble force between two pieces of wood.
(1) Bushing
(2) Nut
(3) 21 mm
(4) 14 mm
(5) Bolt
(2) Tighten the bolts which hold the oil pump to
the bracket.
Tightening torque:
15.7 N·m (1.6 kgf-m, 11.6 ft-lb)
Oil Pump
POWER ASSISTED SYSTEM (POWER STEERING)
Tightening torque:
37.3 N·m (3.8 kgf-m, 27.5 ft-lb)
2) Attach the installation bolts of the power steering
pump bracket.
Tightening torque:
<Ref. to PS-7, OIL PUMP, COMPONENT, Gen-
eral Description.>
PS-00135
3) Connect the pressure hose and suction hose.
Tightening torque:
Eye bolt
40 N·m (4.1 kgf-m, 29.5 ft-lb)
CAUTION:
Be careful when installing; If the hose is twisted
it may come into contact with other parts.
• Non-turbo model
PS-00128
(1) Suction hose
(2) Pressure hose
PS-47
PS-00137
PS-00188
(1)
(2)
PS-00688