Subaru LEGACY 2006 Manual page 3770

asieps_tobira.book 35 ページ ２００９年１０月２６日 月曜日 午前９時１６分
8. Preparation for Overhaul
A: PROCEDURE
1) Clean oil, grease, dirt and dust from the trans-
mission.
2) Drain the oil by removing drain plug. Tighten the
drain plug after draining.
NOTE:
Use a new gasket.
Tightening torque:
44 N·m (4.5 kgf-m, 33 ft-lb) (Aluminum gas-
ket)
70 N·m (7.1 kgf-m, 51 ft-lb) (Copper gasket)
3) Attach the transmission to ST.
ST 499937100 TRANSMISSION STAND
4) Apply oil to rotating parts before assembly.
5) All disassembled parts, if to be reused, should
be reinstalled in the original positions and direc-
tions.
6) Gaskets, lock washers and lock nuts must be re-
placed with new parts.
7) Apply liquid gasket to the specified areas to pre-
vent leakage.
Preparation for Overhaul
MT-00097
S T
MT-00115
5MT-35
MANUAL TRANSMISSION AND DIFFERENTIAL