Subaru LEGACY 2006 Manual page 3983

asieps_tobira.book 19 ページ ２００９年１０月２６日 月曜日 午前９時１６分
2. REAR BUSHING
1) Install the rear bushing with its longer inner cyl-
inder facing upward and the shorter facing down-
ward and protruding part rearward as shown in the
figure.
(1)
(1) Front arm
(2) Bushing inner cylinder
(3) Longer
(4) Shorter
(5) Protrusion portion
2) Align the center of rear bushing recess portion
with the aligning mark on the front arm.
(1) Alignment mark
(2) Recess section
Front Arm
(5)
(3)
(4)
(2)
FS-00113
(1)
(2)
(1)
FS-00136
FS-19
3) Using the ST and a press, install the rear bush-
ing.
ST1 20299AG000 REMOVER
ST2 20299AG010 BASE
(1)
(2)
(1) Press
(2) Front arm
(3) Rear bushing
E: INSPECTION
1) Check the front arm for damage or cracks, and
correct or replace if defective.
2) Check the bushing for abnormal fatigue or dam-
age.
FRONT SUSPENSION
ST1
(3)
ST2
FS-00127