Subaru LEGACY 2006 Manual page 4049

asieps_tobira.book 8 ページ ２００９年１０月２６日 月曜日 午前９時１６分
POWER ASSISTED SYSTEM (POWER STEERING)
• H6 model
T1
T3
T3
(1) Oil pump
(2) Pulley
C: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Vehicle components are extremely hot after driv-
ing. Be wary of receiving burns from heated parts.
• Use SUBARU genuine power steering fluid,
grease etc. or the equivalent. Do not mix fluid,
grease etc. of different grades or manufacturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before securing a part on a vise, place cushion-
ing material such as wooden blocks, aluminum
plate or cloth between the part and the vise.
General Description
T2
(3)
(4)
(3) Bracket
(4) Belt tensioner
PS-8
T3
Tightening torque: N·m (kgf-m, ft-lb)
T1: 15.7 (1.6, 11.6)
T2: 25 (2.5, 18.4)
T3: 33 (3.4, 24.3)
T4: 37.3 (3.8, 27.5)
T4
(1)
(2)
PS-00699