Subaru LEGACY 2006 Manual page 3994

asieps_tobira.book 2 ページ ２００９年１０月２６日 月曜日 午前９時１６分
FRONT SUSPENSION
1. General Description
A: SPECIFICATION
Wheel arch height
+12 mm
(Tolerance:
–24 mm
Camber (Tolerance:±0°45' Differences between
RH and LH: 45' or less)
Caster (Referential Value)
Front
Steering angle (Tolerance: ±1.5°)
Toe-in
Kingpin angle (Referential Value)
Diameter of stabilizer
Wheel arch height
+12 mm
(Tolerance:
–24 mm
Camber (Tolerance:±0°45' Differences between
Rear
RH and LH: 45' or less)
Toe-in
Thrust angle (Tolerance: ±0°30')
Diameter of stabilizer
*1
: 2.5 GT spec. B model
*2
: OUTBACK model
–3 — 0 mm (–0.12 — 0 in) Toe angle (sum of both wheels): –0°15' — 0°
*3
: Except for OUTBACK model
0±3 mm (0±0.12 in) Toe angle (sum of both wheels): 0°±0°15'
NOTE:
• Front and rear toe-in and front camber can be
adjusted. Adjust if the toe-in or camber tolerance
exceeds specifications.
• Other items indicated in the specifications table
cannot be adjusted. If other items exceed specifica-
tions, check suspension parts and connections for
deformation, and replace with new parts as re-
quired.
General Description
Model
2.5 i
+0.47 in )) mm (in)
(
–0.94 in
Inner
37.2°, 33.8°
wheel
Outer
33.0°, 30.2°
wheel
mm (in)
mm (in) 20 (0.79)
+0.47 in )) mm (in)
(
–0.94 in
mm (in)
mm (in) 15 (0.59) 16 (0.63)
FS-2
Sedan
2.5 GT OUTBACK 2.5 i
381 (15.0) 439 (17.3)
–0°15' 0°40'
5°55' 4°55'
*1
38.0°
*1
33.7°
0±3 (0±0.12) Toe angle (sum of both wheels): 0°±0°15'
13°45' 12°05'
21 (0.83) 20 (0.79)
365 (14.4) 438 (17.2)
–0°40' –0°10'
*3 *2
0°
15 (0.59)
B
(1)
A
(1) Front
A – B = Positive: Toe-in, Negative: Toe-out
α = Individual toe angles
Wagon
2.5 GT OUTBACK
381 (15.0) 439 (17.3)
–0°15' 0°40'
5°40' 4°55'
37.2° 38.0°
33.0° 33.7°
13°45' 12°05'
21 (0.83)
375 (14.8) 438 (17.2)
–0°30' –0°10'
*3 *2
16 (0.63) 15 (0.59)
FS-00001