Subaru LEGACY 2006 Manual page 3678

asieps_tobira.book 15 ページ ２００９年１０月２６日 月曜日 午前９時１６分
C: INSPECTION
1. RELEASE BEARING
NOTE:
Since this bearing is grease-sealed and is a non-lu-
brication type, do not wash with gasoline or any
other solvent when servicing the clutch.
1) Check the bearing for smooth movement by ap-
plying force to the bearing in the radial direction.
Radial direction stroke:
1.6 mm (0.063 in)
(A)
(A) Bearing case
2) While applying force to the bearing in the rota-
tional direction, check the bearing for smooth rota-
tion.
(A)
(A) Bearing case
3) Check for wear and damage at the bearing case
surface in contact with the lever.
Release Bearing and Lever
2. RELEASE LEVER
Check the pivot portion of the lever and the contact
area with the release bearing case for wear.
CL-00032
CL-00160
CL-15
CLUTCH SYSTEM
(A)
(B)
(C)
(A) Clutch release lever
(B) Pivot
(C) Clutch release bearing
CL-00034