Subaru LEGACY 2006 Manual page 3364

asieps_tobira.book 94 ページ ２００９年１０月２６日 月曜日 午前９時１６分
AUTOMATIC TRANSMISSION
36.AT Main Case
A: REMOVAL
1) Remove the transmission assembly from vehicle
body. <Ref. to 5AT-34, REMOVAL, Automatic
Transmission Assembly.>
2) Pull out the torque converter assembly. <Ref. to
5AT-63, REMOVAL, Torque Converter Assembly.>
3) Remove the transmission harness connector
from stay.
4) Disconnect the air breather hose.
5) Remove the oil charge pipe. <Ref. to 5AT-62,
REMOVAL, Oil Charge Pipe.>
6) Remove the ATF filter inlet and outlet pipes.
<Ref. to 5AT-55, REMOVAL, ATF Filter.>
7) Remove the extension case. <Ref. to 5AT-65,
REMOVAL, Extension Case.>
8) Remove the center differential carrier. <Ref. to
5AT-74, REMOVAL, Center Differential Carrier.>
9) Remove the reduction driven gear. <Ref. to 5AT-
71, REMOVAL, Reduction Driven Gear.>
10) Separate the converter case from the transmis-
sion case. <Ref. to 5AT-78, REMOVAL, Converter
Case.>
11) Remove the control valve body. <Ref. to 5AT-
53, REMOVAL, Control Valve Body.>
12) Remove the oil pump cover.
<Ref. to 5AT-80, REMOVAL, Oil Pump Cover.>
NOTE:
The input clutch pack assembly and front sun gear
assembly are also removed together.
13) Remove the needle bearing of the middle carri-
er assembly.
AT Main Case
14) Remove the middle carrier assembly.
15) Remove the rear carrier assembly.
AT-01990
AT-01991
5AT-94
AT-01992
AT-01993