Subaru LEGACY 2006 Manual page 3261

asieps_tobira.book 112 ページ ２００９年１０月２６日 月曜日 午前９時１６分
AUTOMATIC TRANSMISSION
9) Install the one-way clutch inner race to the low
clutch drum, and then apply compressed air to re-
move the low clutch piston.
(A)
(A) Apply compressed air.
(B) One-way clutch inner race
10) Remove the one-way clutch inner race.
11) Remove the one-way clutch after taking out the
snap ring.
(A)
(B)
(A) Snap ring
(B) Plate
(C) One-way clutch
12) Remove the needle bearing after taking out the
snap ring.
(A)
(A) Needle bearing
(B) Snap ring
AT Main Case
3. 2-4 BRAKE
Separate the 2-4 brake piston and piston retainer.
(B)
AT-00266
4. ONE-WAY CLUTCH INNER RACE
1) Remove the seal ring.
(C)
AT-00267
2) Remove the needle bearing using ST.
ST 398527700
(B)
AT-00268
4AT-112
( B )
( A )
(A) 2-4 brake piston
(B) 2-4 brake piston retainer
(A)
(B)
(A) One-way clutch inner race
(B) Seal ring
PULLER ASSY
AT-00288
AT-00298