Subaru LEGACY 2006 Manual page 3707

asieps_tobira.book 34 ページ ２００９年１０月２６日 月曜日 午前９時１６分
CONTROL SYSTEMS
8. MT Gear Shift Lever
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Remove the gear shift knob.
4) Remove the console box. <Ref. to EI-52, RE-
MOVAL, Console Box.>
5) Remove the clamp.
6) Remove the bushing and insulator assembly.
7) Remove the harness clamp from the plate.
MT Gear Shift Lever
8) Remove the plate assembly from the vehicle
body.
(C)
(D)
9) Lift up the vehicle.
10) Remove the rear exhaust pipe and muffler.
• SOHC model
<Ref. to EX(H4SO)-8, REMOVAL, Rear Exhaust
Pipe.> <Ref. to EX(H4SO)-10, REMOVAL, Muf-
fler.>
CS-00311
• DOHC turbo model
<Ref. to EX(H4DOTC)-12, REMOVAL, Rear Ex-
haust Pipe.> <Ref. to EX(H4DOTC)-13, REMOV-
AL, Muffler.>
• DOHC 3.0 L model
<Ref. to EX(H6DO)-7, REMOVAL, Rear Exhaust
Pipe.> <Ref. to EX(H6DO)-9, REMOVAL, Muffler.>
11) Remove the heat shield cover.
CS-00312
12) Remove the stay from transmission bracket.
CS-00537
(A) Stay
(B) Transmission bracket
CS-34
(B)
(A)
CS-00314
AT-01331
(A)
(B)
CS-00050