Subaru LEGACY 2006 Manual page 4079

asieps_tobira.book 4 ページ ２００９年１０月２６日 月曜日 午前９時１６分
REAR SUSPENSION
2. SHOCK ABSORBER
(1) Mount
(2) Upper rubber sheet
(3) Dust cover
C: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Before disposing of shock absorbers, be sure to
bleed the gas out completely. Also, do not expose
to flames or fire.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Use SUBARU genuine grease etc. or equivalent.
Do not mix grease etc. of different grades or man-
ufacturers.
• Before securing a part on a vise, place cushion-
ing material such as wood blocks, aluminum plate,
or cloth between the part and the vise.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
General Description
(4)
(6)
(5)
T3
(6)
(4) Coil spring
(5) Shock absorber
(6) Self-locking nut
RS-4
T1
(6)
T2
(1)
(2)
(3)
Tightening torque: N·m (kgf-m, ft-lb)
T1: 30 (3.1, 22.4)
T2: 35 (3.6, 26)
T3: 160 (16.3, 118)
RS-00037