Subaru LEGACY 2006 Manual page 3332

asieps_tobira.book 79 ページ ２００９年１０月２６日 月曜日 午前９時１６分
8) Apply proper amount of liquid gasket to the en-
tire oil pan mating surface, and then install it.
Liquid gasket:
THREE BOND 1217B (Part No. K0877YA020)
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
9) Install the transmission harness connector to the
stay.
10) Install the air breather hose. <Ref. to 5AT-61,
INSTALLATION, Air Breather Hose.>
11) Install the ATF filter pipe. <Ref. to 5AT-55, IN-
STALLATION, ATF Filter.>
12) Install the oil charge pipe with O-ring. <Ref. to
5AT-62, INSTALLATION, Oil Charge Pipe.>
13) Install the torque converter assembly. <Ref. to
5AT-63, INSTALLATION, Torque Converter As-
sembly.>
14) Install the transmission assembly to the vehi-
cle. <Ref. to 5AT-37, INSTALLATION, Automatic
Transmission Assembly.>
C: INSPECTION
Measure the backlash, and then adjust it to be with-
in standard values. <Ref. to 5AT-87, ADJUST-
MENT, Drive Pinion Shaft Assembly.>
Converter Case
AT-03249
5AT-79
AUTOMATIC TRANSMISSION