Subaru LEGACY 2006 Manual page 3327

asieps_tobira.book 82 ページ ２００９年１０月２６日 月曜日 午前９時１６分
AUTOMATIC TRANSMISSION
6) Install the snap ring.
7) Measure the clearance between retainer plate
and snap ring, and then select the suitable retainer
plate from table.
Front brake clearance specification:
0.7 — 1.1 mm (0.028 — 0.043 in)
Front brake retainer plate
Part number
31567AB130
31567AB140
31567AB150
31567AB160
8) Remove the snap ring, replace the drive plate
used in measurement of clearance with the retainer
plate, and then reassemble.
Oil Pump Cover
2. OIL PUMP
1) Apply ATF to oil pump assembly, and then install
it to oil pump housing.
2) Install the O-ring to oil pump cover.
3) Install the oil pump housing to the oil pump cov-
er.
Tightening torque:
AT-01980
AT-01983
Thickness mm (in)
3.4 (0.134)
3.6 (0.142)
3.8 (0.150)
4.0 (0.157)
5AT-82
10 N·m (1.0 kgf-m, 7.4 ft-lb)
AT-01982