Subaru LEGACY 2006 Manual page 3290

asieps_tobira.book 65 ページ ２００９年１０月２６日 月曜日 午前９時１６分
ATF Cooler Pipe and Hose
AUTOMATIC TRANSMISSION
C: INSPECTION
Repair or replace any faulty hoses, pipes, clamps,
and washers found in the inspection below.
1) Check for ATF leaks in joints between the trans-
mission, radiator, pipes, and hoses.
2) Check the clamp for deformation.
3) Lightly bend the hose and check for cracks in the
surface or other damages.
4) Pinch the hose with your fingers and check for
poor elasticity. Also check for poor elasticity in the
parts where the clamp was installed by pressing
with your fingernail.
5) Check for peeling, cracks, and deformation at
the tip of the hose.
4AT-65