Subaru LEGACY 2006 Manual page 4171

asieps_tobira.book 18 ページ ２００９年１０月２６日 月曜日 午前９時１６分
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS)
9) On the «VDC Diagnosis» screen, select the {Di-
agnostic Code(s) Display}, and then press the
[YES] key.
NOTE:
• For details concerning operation procedures, re-
fer to the "SUBARU SELECT MONITOR OPERA-
TION MANUAL".
• For details concerning DTCs, refer to "List of Di-
agnostic Trouble Code (DTC)". <Ref. to VDC(di-
ag)-36, List of Diagnostic Trouble Code (DTC).>
• DTCs are displayed up to three in detected or-
der.
• If a particular DTC is not stored in memory prop-
erly at the occurrence of problem (due to a drop in
VDCCM&H/U power supply etc.), the DTC suffixed
with a question mark "?" is displayed on Subaru Se-
lect Monitor display screen. This shows it may be
an unreliable reading.
10) If VDC and Subaru Select Monitor cannot com-
municate, check the communication circuit. <Ref.
to VDC(diag)-21, COMMUNICATION FOR INI-
TIALIZING IMPOSSIBLE, INSPECTION, Subaru
Select Monitor.>
Display Contents to be monitored
The current DTC is displayed on Subaru
Current
Select Monitor display screen.
The latest DTC in previous troubles is
Old displayed on Subaru Select Monitor dis-
play screen.
The second latest DTC in previous trou-
Older bles is displayed on Subaru Select Moni-
tor display screen.
The third latest DTC in previous prob-
Third previous lems is displayed on Subaru Select Mon-
itor display screen.
Subaru Select Monitor
VDC(diag)-18