Subaru LEGACY 2006 Manual page 3886

asieps_tobira.book 67 ページ ２００９年１０月２６日 月曜日 午前９時１６分
10) Attach the nut and use the ST to fix the com-
panion flange in place, then tighten.
ST 498427200 FLANGE WRENCH
Tightening torque:
191 N·m (19.5 kgf-m, 141 ft-lb)
ST
11) Measure the initial torque and initial load.
Initial load:
12.7 — 32.2 N (1.3 — 3.3 kgf, 2.9 — 7.2 lb)
Initial torque:
0.48 — 1.22 N·m (0.049 — 0.124 kgf, 0.35 —
0.9 ft-lb)
Rear Differential (VA-type)
12) Install the hypoid driven gear to differential
case.
NOTE:
• Tighten diagonally while tapping the bolt heads.
• Set a cushioning such as wooden block, alumi-
num plate or shop cloth between vise and differen-
tial case if the side gear comes into contact with
vise.
Tightening torque:
62 N·m (6.3 kgf-m, 45.7 ft-lb)
DI-00372
13) Press the side bearing into differential case us-
ing ST.
ST 398487700
DI-00152
DI-00481
DI-67
DIFFERENTIALS
DI-00371
DRIFT
ST
DI-00095