Subaru LEGACY 2006 Manual page 3248

asieps_tobira.book 93 ページ ２００９年１０月２６日 月曜日 午前９時１６分
• Flank contact
Checking item: Backlash is too small.
Contact pattern
Corrective action: Reduce thickness of the pinion
height adjusting washer according to the proce-
dures for moving the drive pinion away from the
driven gear.
Drive Pinion Shaft Assembly
• Toe contact (inside end contact)
Check item: Teeth contact area is too small.
Contact pattern
AT-00209
Corrective action: Reduce thickness of the pinion
height adjusting washer according to the proce-
dures for moving the drive pinion away from the
driven gear side.
AT-00213
4AT-93
AUTOMATIC TRANSMISSION
AT-00210
AT-00213