Subaru LEGACY 2006 Manual page 3794

asieps_tobira.book 48 ページ ２００９年１０月２６日 月曜日 午前９時１６分
MANUAL TRANSMISSION AND DIFFERENTIAL
14.Transmission Case
A: REMOVAL
1) Remove the manual transmission assembly
from the vehicle. <Ref. to 5MT-24, REMOVAL,
Manual Transmission Assembly.>
2) Remove the clutch release lever. <Ref. to CL-
14, REMOVAL, Release Bearing and Lever.>
3) Remove the transfer case together with the ex-
tension case assembly. <Ref. to 5MT-36, REMOV-
AL, Transfer Case
Assembly.>
4) Remove the bearing mounting bolt.
5) Remove the main shaft rear plate.
(A)
(A) Main shaft rear plate
6) Separate the transmission case into the right
and left cases by loosening the coupling bolts and
nuts.
Transmission Case
and Extension Case
MT-00158
MT-00159
MT-00160
5MT-48
7) Remove the drive pinion shaft assembly from
the left side of the transmission case.
NOTE:
Use a hammer handle, etc. to remove if too tight.
( B )
(A) Main Shaft Assembly for Single-Range
(B) Drive pinion shaft ASSY
8) Remove the main shaft assembly for single-
range.
9) Remove the front differential assembly.
NOTE:
• Do not confuse the right and left roller bearing
outer races.
• Be careful not to damage the oil seal of retainer.
( A )
MT-00161
MT-00162