Subaru LEGACY 2006 Manual page 3998

asieps_tobira.book 6 ページ ２００９年１０月２６日 月曜日 午前９時１６分
FRONT SUSPENSION
2. Wheel Alignment
A: INSPECTION
Check the following items before performing the wheel alignment measurement.
Check items before measuring wheel alignment:
• Tire inflation pressure
• Uneven wear of RH and LH tires, or difference of sizes
• Tire runout
• Excessive play and wear of ball joint
• Excessive play and wear of tie rod end
• Excessive play of wheel bearing
• Right and left wheel base imbalance
• Deformation and excessive play of steering link
• Deformation and excessive play of suspension parts
Check, adjust and measure the wheel alignment in accordance with the procedures indicated in the figure.
<Ref. to FS-10, FRONT WHEEL TOE-IN, INSPECTION, Wheel Alignment.>
<Ref. to FS-11, REAR WHEEL TOE-IN, INSPECTION, Wheel Alignment.>
Wheel Alignment
Wheel arch height (front and rear wheels)
<Ref. to FS-7, WHEEL ARCH HEIGHT, INSPECTION, Wheel Alignment.>
Camber (front and rear wheels)
<Ref. to FS-8, CAMBER, INSPECTION, Wheel Alignment.>
Caster (front wheel)
<Ref. to FS-9, CASTER, INSPECTION, Wheel Alignment.>
Steering angle
<Ref. to FS-10, STEERING ANGLE, INSPECTION, Wheel Alignment.>
Front wheel toe-in
Rear wheel toe-in
Thrust angle
<Ref. to FS-12, THRUST ANGLE, INSPECTION, Wheel Alignment.>
FS-6
↓
↓
↓
↓
↓
↓