Subaru LEGACY 2006 Manual page 3991

asieps_tobira.book 23 ページ ２００９年１０月２６日 月曜日 午前９時１６分
F: DISPOSAL
1. EXCEPT FOR BILSTEIN STRUT
CAUTION:
• Before handling struts, be sure to wear gog-
gles to protect eyes from gas, oil and cutting
powder.
• Do not disassemble the strut damper or
throw into flames.
• When discarding gas filled struts, drill holes
in them to purge the gas.
1) Place the strut on a level surface with the piston
rod fully expanded.
2) Using a 2 — 3 mm (0.08 — 0.12 in) dia. drill,
make holes in areas shown in the figure.
(1) 40 mm (1.57 in)
Front Strut
(1)
FS-00047
FS-23
2. BILSTEIN STRUT
CAUTION:
• Before handling struts filled with gas, be sure
to wear goggles to protect eyes from gas, oil
and metal shavings.
• Do not disassemble the strut damper or
throw into flames.
• When discarding gas filled struts, drill holes
in them to purge the gas.
1) Place the gas-filled strut on a level surface with
the damping tube fully extended.
2) Using a 2 — 3 mm (0.08 — 0.12 in) dia. drill,
make the holes at (1) first, and then (2).
(3)
(1) (2)
(4)
(1) 20 mm (0.78 in)
(2) 10 mm (0.39 in)
(3) Strut
(4) Damping tube
FRONT SUSPENSION
FS-00096