asieps_tobira.book 73 ページ 2009年10月26日 月曜日 午前9時16分
3) Calculation formula:
Select the ball bearing shim from the table to adjust
clearances within 0.05 — 0.25 mm (0.0020 —
0.0098 in).
When clearances are 0.05 mm (0.0020 in):
T (mm) = B – A + 0.23
[T (in) = B – A + 0.0091]
When clearances are 0.25 mm (0.0098 in):
T (mm) = B – A + 0.03
[T (in) = B – A + 0.0011]
T: Shim clearance
A: Height from the mating surface of the AT main
case to the ball bearing outer ring end surface
B: Depth from mating surface of extension case to
ball bearing outer ring contact surface
Reduction gear shim
Part number
31288AA030
31288AA050
31288AA060
Reduction Driven Gear
Thickness mm (in)
0.2 (0.008)
0.5 (0.020)
0.3 (0.012)
5AT-73
AUTOMATIC TRANSMISSION