asieps_tobira.book 5 ページ 2009年10月26日 月曜日 午前9時16分
Drive pinion bearing pre-
load
Side gear backlash
Hypoid driven gear to drive pinion backlash limit
Hypoid driven gear runout limit on its back surface
General Description
Measure with spring measurement
(at companion flange bolt hole)
Measure with torque wrench
DI-5
N (kgf, lb)
17.7 — 38.8 (1.8 — 4.0, 4.0 — 8.7)
N·m (kgf-m, ft-lb) 0.67 — 1.47 (0.068 — 0.15, 0.49 — 1.08)
mm (in)
0.1 — 0.2 (0.0039 — 0.0079)
mm (in)
0.10 — 0.20 (0.0039 — 0.0079)
mm (in)
0.05 (0.0020)
DIFFERENTIALS