asieps_tobira.book 38 ページ 2009年10月26日 月曜日 午前9時16分
CONTROL SYSTEMS
8) Remove the boss from the joint.
9) Remove the bushing and spacer from the boss.
(B)
(A)
(A) Bushing
(B) Spacer
10) Remove the bushing and cushion rubber from
the stay.
(A)
(A) Bushing
(B) Stay
(C) Cushion rubber
MT Gear Shift Lever
CS-00322
(A)
CS-00238
(B)
(C)
CS-00058
CS-38
D: ASSEMBLY
NOTE:
• Clean all the parts before assembly.
• Apply
grease
[KOPR-KOTE
003603001) or equivalent] to each part.
1) Mount the bushing and cushion rubber to the
stay.
(A)
(A) Bushing
(B) Cushion rubber
2) Install the bushing and spacer to boss.
(B)
(A)
(A) Bushing
(B) Spacer
3) Using new self-locking nuts, install the boss to
the joint.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
(Part
No.
(B)
CS-00061
(A)
CS-00238
CS-00322