Subaru LEGACY 2006 Manual page 3297

asieps_tobira.book 58 ページ ２００９年１０月２６日 月曜日 午前９時１６分
AUTOMATIC TRANSMISSION
21.ATF Cooler Pipe and Hose
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the battery.
3) Lift-up the vehicle.
4) Remove the under cover.
5) Remove the radiator under cover.
6) Disconnect the ATF cooler hose from the radia-
tor.
NOTE:
• Do not use a screwdriver or other pointed tools.
• If it is hard to remove the hose, wrap the hose
with cloth to prevent from damaging it, and while
turning with pliers, pull straight out by hand.
7) Disconnect the ATF cooler hoses from the pipes.
NOTE:
• Do not use a screwdriver or other pointed tools.
• If it is hard to remove the hose, wrap the hose
with cloth to prevent from damaging it, and while
turning with pliers, pull straight out by hand.
ATF Cooler Pipe and Hose
8) Disconnect the ATF cooler pipe from frame.
AT-01344
9) Remove the oil cooler inlet and outlet pipes.
NOTE:
When disconnecting the outlet pipe, be careful not
to lose the ball and spring used with retaining
screw.
AT-01345
(A) Outlet pipe
(B) Inlet pipe
AT-01388
5AT-58
(A)
(B)
AT-01347
AT-01383