Subaru LEGACY 2006 Manual page 4030

bp06usen601.fm 26 ページ ２０１０年５月２７日 木曜日 午後３時６分
POWER ASSISTED SYSTEM (POWER STEERING)
11) Using a snap ring pliers, remove the snap ring,
valve, oil seal and back-up washer.
CAUTION:
Be careful not to scratch the pinion and valve
assembly.
(3)
(2)
(1)
(1) Snap ring
(2) Valve
(3) Oil seal
(4) Back-up ring
D: ASSEMBLY
1. RACK HOUSING ASSEMBLY
1) Using a press, install the bushing to gearbox in-
stallation portion.
2) Insert the ST to rack.
ST 34199AG030 GUIDE
ST
(1) Seal ring
(2) Rack
3) Install the seal ring to piston portion of rack.
Steering Gearbox
(4)
PS-00518
PS-00519
(1)
(2)
PS-00520
PS-26
4) Using the ST, form the seal ring properly.
ST1 34199AG080 FORMER PISTON
ST2 34199AG050 GUIDE G (24)
(1)
ST2
ST1
(1) Seal ring
(2) Rack
5) Fit the ST over toothed portion of rack assembly,
and insert the oil seal to rack.
ST 926390001 COVER & REMOVER
ST
(1)
(1) Rack ASSY
6) Remove the ST from rack assembly.
7) Install the back-up washer from the gear side of
rack.
(1) Oil seal
(2) Back-up washer
(3) Rack
8) Check the threaded end of holder and gearbox
cylinder end for burrs, damage, etc. Correct if
faulty.
(2)
PS-00559
PS-00161
PS-00077