Subaru LEGACY 2006 Manual page 4037

bp06usen601.fm 33 ページ ２０１０年５月２７日 木曜日 午後 時３２分
13) Using a press, push the outer race of bearing
and press-fit the pinion & valve assembly into hous-
ing.
(1) Pinion & valve ASSY
(2) Bearing
(3) Housing
14) Apply the specified grease to dust cover.
15) Install the dust cover on valve assembly.
CAUTION:
Be sure to install the dust cover to groove of
shaft.
(1)
(1) Dust cover
(2) Groove
16) Apply the genuine grease to the pinion gear
and bearing of valve assembly.
Steering Gearbox
POWER ASSISTED SYSTEM (POWER STEERING)
17) Install new O-ring to valve assembly.
(1)
(2)
(3)
PS-00533
18) Insert the valve assembly into place while fac-
ing the rack teeth toward pinion.
19) Tighten the bolts alternately to secure the valve
assembly.
Tightening torque:
(2)
20 N·m (2.0 kgf-m, 14.8 ft-lb)
CAUTION:
Be sure to alternately tighten the bolts.
PS-00534
20) Apply liquid gasket to 1/3 or more of entire pe-
rimeter of adjusting screw thread.
Liquid gasket:
THREE BOND 1102 or equivalent
PS-00165
PS-33
(1)
(1) O-ring
PS-00535
PS-00143