Subaru LEGACY 2006 Manual page 3914

asieps_tobira.book 20 ページ ２００９年１０月２６日 月曜日 午前９時１６分
BRAKE
6) Position the boot in the grooves on cylinder and
piston.
(2)
(1)
(1) Piston
(2) Piston boot
(3) Caliper body
(4) Piston seal
7) Apply a coat of specified grease to the lock pin
and guide pin outer surface, cylinder inner surface,
and boot grooves.
Grease:
NIGLUBE RX-2 (Part No. K0779GA102)
8) Insert the lock pin and guide pin boot into the
support.
(1)
(1) Pin boot
(2) Lock pin or guide pin
(3) Grease applied area
2. 17-INCH TYPE
Refer to 16-inch type. <Ref. to BR-19, 16-INCH
TYPE, ASSEMBLY, Front Disc Brake Assembly.>
E: INSPECTION
1) Repair or replace the faulty parts.
2) Check the caliper body and piston for uneven
wear, damage or rust.
3) Check the rubber parts for damage or deteriora-
tion.
Front Disc Brake Assembly
(3)
(4)
BR-00243
: (3)
(2)
BR-00362
BR-20