Subaru LEGACY 2006 Manual page 4069

asieps_tobira.book 3 ページ ２００９年１０月２６日 月曜日 午前９時１６分
2. PARKING BRAKE CABLE
T1
(1)
T1
(1) Parking brake lever
(2) Parking brake switch
(3) Adjusting nut (Self-locking nut)
(4) Equalizer
(5) Bracket
C: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Vehicle components are extremely hot after driv-
ing. Be wary of receiving burns from heated parts.
• Use SUBARU genuine grease etc. or equivalent.
Do not mix grease etc. of different grades or man-
ufacturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before securing a part in a vise, place cushioning
material such as wood blocks, aluminum plate or
cloth between the part and the vise.
• Make sure grease does not come into contact
with the parking shoes.
General Description
(8)
(7)
T2
T1
(6)
(3)
(5)
T1
(4)
T1
(2)
T1
(6) Clamp
(7) Parking brake cable RH
(8) Clamp
(9) Parking brake cable LH
PB-3
T2
(9)
T1
Tightening torque: N·m (kgf-m, ft-lb)
T1: 18 (1.8, 13.0)
T2: 33 (3.4, 24.3)
PARKING BRAKE
(8)
PB-00113