Subaru LEGACY 2006 Manual page 3704

asieps_tobira.book 25 ページ ２００９年１０月２６日 月曜日 午前９時１６分
B: INSTALLATION
1) Install the select cable to plate assembly.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
T
2) Install the select cable to range select lever.
3) Install the plate assembly to transmission.
Tightening torque:
T: 24.5 N·m (2.5 kgf-m, 18.1 ft-lb)
• 4AT
(A)
T
(B)
(A) Select cable
(B) Plate ASSY
• 5AT
(A) Select cable
(B) Plate ASSY
Select Cable
T
CS-00607
CS-00039
(A)
(B)
CS-00328
CS-25
4) Install the washer and snap pin to range select
lever.
• 4AT
(A)
(D)
(C) (E)
(A) Range select lever
(B) Snap pin
(C) Select cable
(D) Bracket
(E) Washer
• 5AT
(B)
(D)
(A) Range select lever
(B) Snap pin
(C) Select cable
(D) Bracket
(E) Washer
5) Install new clamp paying attention to the install-
ing direction.
(B)
C
(A)
C
(A) Clamp
(B) Forward
CONTROL SYSTEMS
(B)
CS-00036
(E)
(A)
(C)
CS-00327
CS-00534