Manual Transmission Assembly - Subaru LEGACY 2006 Manual

Hide thumbs Also See for LEGACY 2006:

asieps_tobira.book 24 ページ２００９年１０月２６日　月曜日　午前９時１６分

MANUAL TRANSMISSION AND DIFFERENTIAL

3. Manual Transmission As-

1) Open the front hood fully, and support with stay.

2) Disconnect the ground cable from the battery.

3) Drain transmission gear oil completely.

4) Remove the air intake chamber and air cleaner

case. (Non-turbo model) <Ref. to IN(H4SO)-7, RE-

MOVAL, Air Intake Chamber.> <Ref. to IN(H4SO)-

5, REMOVAL, Air Cleaner Case.>

5) Remove the air intake chamber stay. (Non-turbo

6) Remove the intercooler. (Turbo model) <Ref. to

IN(H4DOTC)-12, REMOVAL, Intercooler.>

7) Disconnect the connector back-up light switch

and neutral position switch.

• Non-turbo model

(A) Neutral position switch connector (Brown)

(B) Back-up light switch connector (Gray)

• Turbo model

Manual Transmission Assembly

8) Remove the starter. <Ref. to SC(H4SO)-6, RE-

MOVAL, Starter.>

9) Remove the operating cylinder from the trans-

10) Remove the pitching stopper.

11) Set the ST.

ST 41099AC000 ENGINE SUPPORT ASSY

12) Remove the bolts which hold upper side of

transmission to engine.

13) Lift-up the vehicle.

Show Quick Links