Subaru LEGACY 2006 Manual page 3701

asieps_tobira.book 29 ページ ２００９年１０月２６日 月曜日 午前９時１６分
C: INSPECTION
1 2 3 4 5
Step
1 SHIFT-UP SWITCH CONTINUITY CHECK.
1) Press the shift-up switch.
2) Measure the resistance between the shift
switch connector terminals.
Terminals
No. 4 — No. 3:
2 SHIFT-DOWN SWITCH CONTINUITY
CHECK.
1) Press the shift-down switch.
2) Measure the resistance between the shift
switch connector terminals.
Terminals
No. 3 — No. 2:
3 CHECK SHIFT SWITCH INSULATION.
1) Do not operate the shift switch.
2) Measure the resistance between the shift
switch connector terminals.
Terminals
No. 3 — No. 2:
No. 3 — No. 4:
AT Steering Shift Switch
CS-00387
Check
Is the resistance less than 10
Ω?
Is the resistance less than 10
Ω?
Is the resistance 1 Ω?
CS-29
CONTROL SYSTEMS
Yes No
Go to step 2. Replace the steer-
ing shift switch.
Go to step 3. Replace the steer-
ing shift switch.
Steering shift Replace the steer-
switch is normal. ing shift switch.