NEC Univerge sv8500 Manual page 891

10.2 Installation
This section shows how to install the hardware required for using MG-COT. Be sure to
take measures to anti-static electricity.
10.2.1 How to Set MG-COT
MG-COT Card is used by mounting on 1U-MPC (19-inch rack mount, 1U-box).
MG0
MG1
MG0 MG2 MG4
100M LINK
ON
LINE
PWR ALM
MG1 MG3 MG5
Ether
OPERATION
MG-COT Card (SCA-6COTB)
Insert MG-COT Card to 1U-MPC.
STEP 1
Secure the MG-COT Card to 1U-MPC fixing two screws on right and left sides.
STEP 2
1U-MPC (Multi Purposes Chassis)
MG2 MG4 PFT
MG3 MG5
CONSOLE MUSIC
RESET
MG6
VOL.2-638
MG-COT Card [SCA-6COTB]
bracket to mount on 19-inch rack
Phillips screwdriver
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required